Description of food grade liquid silicone rubber for sex toy and sex love fun tools
HY-E610 is a kind of two part silicone rubber in addition cure or platinum cure type with mixing ratio of 1:1 or 10:1 . It can cure at room temperature as well as under heat . It's a kind of food grade silicone and mainly used for human body parts.
Application of food grade liquid silicone rubber for sex toy and sex love fun tools
HY-E610 silicone rubber is mainly used for human body parts making, such as: prosthesis, prosthetic leg, prosthetic arm, prosthetic hand, sex toys, body organs, body breast enhancers, shoulder pads, paster, bra pads, patches, antislip mat, traction, human body shape, simulate robot, silicone doll, simulate props, simulate people, silicone prostheses, silicone mask, ultra-realistic replicas of face,etc.
Technical Parameters of food grade liquid silicone rubber for sex toy and sex love fun tools
Characteristics of food grade liquid silicone rubber for sex toy and sex love fun tools
*An exceptional fluidity and good operability, easy to demold
*Good tensile and tear strength
*Outstanding bubble releasing
*Non-deformation
*Low shrinkage
*Aging resistance ,high temperature resistance (200ºC)
*Environmentally, food-grade
Operation instructions of food grade liquid silicone rubber for sex toy and sex love fun tools
Step 1: prepare the original molds
Prepare an perfect original mold and clean it totally before operation .
*Notes:Make sure your original molds and operation tool cleaned up totally to avoid uncure problem .
Step 2: Take 100 G part A and 100 G part B (Or 100 G part A and 10 G part B) and mix them evenly.
*Notes: Addition cure mold making silicon rubber is two part flowing liquid , Pls follow the step strictly:
1.Weigh the two part exactly by electronic weight..
If any part not in exactly weight , it may cause changing of hardness , or even cause uncure problem.
2.Mix part A and part B evenly.
Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What's more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber.
Step 3: Vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step 4: Pouring casting or Brush operation
*Notes:
1. For simple pattern products we suggest use pouring operation way , which will be very easy to operate and demould. Pourable silicone require light viscosity which will be easy to flow smoothly and easy to de-air .
2.For delicate pattern products we suggest use brushing operation way , which can copy the pattern exactly . Brushable silicone require high viscosity which won't be easy to flow away and easy to brush .
3. We suggest to set the silicone mold for another 12 hours after demould before put into large production .
Warm tips of food grade liquid silicone rubber for sex toy and sex love fun tools
1.As addition cure silicone is a kind of platinum cure system ,which will be easy to cause uncure problem ,so
Kindly follow the tips below :
*Do not mix with liquid condensation silicone rubber or even the tool which used for condensation silicone
*Do not mix with organic matter which contains N, S, P organics and ionic compound like Sn, As,Hg, Ph,
*Do not add any pigment or powder into the addition cure silicone rubber without any testing to prevent uncure problem
Package of food grade liquid silicone rubber for sex toy and sex love fun tools
20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B
200KG/drum packing for part A +200KG/drum packing for part B
Shelf life fo food grade liquid silicone rubber for sex toy and sex love fun tools
Twelve(12) months when stored under dry and cool place by original package under 25ºC
Please don't hesitate to ask for more information if you have any questions,
here Miss Carrie is at your service:
Tel:+86-0755-89948019
Fax:86-755-89948030
Mob:86-18938861895
Website:wendy-rl.en.made-in-china.com
HY-E610 is a kind of two part silicone rubber in addition cure or platinum cure type with mixing ratio of 1:1 or 10:1 . It can cure at room temperature as well as under heat . It's a kind of food grade silicone and mainly used for human body parts.
Application of food grade liquid silicone rubber for sex toy and sex love fun tools
HY-E610 silicone rubber is mainly used for human body parts making, such as: prosthesis, prosthetic leg, prosthetic arm, prosthetic hand, sex toys, body organs, body breast enhancers, shoulder pads, paster, bra pads, patches, antislip mat, traction, human body shape, simulate robot, silicone doll, simulate props, simulate people, silicone prostheses, silicone mask, ultra-realistic replicas of face,etc.
Technical Parameters of food grade liquid silicone rubber for sex toy and sex love fun tools
| Model | Color | Mixing ratio (%) | Pot life (mins, under 25ºC) | Curing time | Hardness ( Shore A ) | Tensile- strength (MPa) | Tear- strength (kN/m) | Viscosity (After A/B mixed ,mPa.s) | Shrinkage rate (%) | Elongation (%) |
| HY-E610 | Translucent | 1:1 or 10:1 | 30-40 | 4-5(hrs under 25ºC) 20-30 (mins under 60ºC) | 10±2 | 5.0±0.5 | 17±5 | 3500±1000 | ≤0.1% | 400% |
Characteristics of food grade liquid silicone rubber for sex toy and sex love fun tools
*An exceptional fluidity and good operability, easy to demold
*Good tensile and tear strength
*Outstanding bubble releasing
*Non-deformation
*Low shrinkage
*Aging resistance ,high temperature resistance (200ºC)
*Environmentally, food-grade
Operation instructions of food grade liquid silicone rubber for sex toy and sex love fun tools
Step 1: prepare the original molds
Prepare an perfect original mold and clean it totally before operation .
*Notes:Make sure your original molds and operation tool cleaned up totally to avoid uncure problem .
Step 2: Take 100 G part A and 100 G part B (Or 100 G part A and 10 G part B) and mix them evenly.
*Notes: Addition cure mold making silicon rubber is two part flowing liquid , Pls follow the step strictly:
1.Weigh the two part exactly by electronic weight..
If any part not in exactly weight , it may cause changing of hardness , or even cause uncure problem.
2.Mix part A and part B evenly.
Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What's more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber.
Step 3: Vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step 4: Pouring casting or Brush operation
*Notes:
1. For simple pattern products we suggest use pouring operation way , which will be very easy to operate and demould. Pourable silicone require light viscosity which will be easy to flow smoothly and easy to de-air .
2.For delicate pattern products we suggest use brushing operation way , which can copy the pattern exactly . Brushable silicone require high viscosity which won't be easy to flow away and easy to brush .
3. We suggest to set the silicone mold for another 12 hours after demould before put into large production .
Warm tips of food grade liquid silicone rubber for sex toy and sex love fun tools
1.As addition cure silicone is a kind of platinum cure system ,which will be easy to cause uncure problem ,so
Kindly follow the tips below :
*Do not mix with liquid condensation silicone rubber or even the tool which used for condensation silicone
*Do not mix with organic matter which contains N, S, P organics and ionic compound like Sn, As,Hg, Ph,
*Do not add any pigment or powder into the addition cure silicone rubber without any testing to prevent uncure problem
Package of food grade liquid silicone rubber for sex toy and sex love fun tools
20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B
200KG/drum packing for part A +200KG/drum packing for part B
Shelf life fo food grade liquid silicone rubber for sex toy and sex love fun tools
Twelve(12) months when stored under dry and cool place by original package under 25ºC
Please don't hesitate to ask for more information if you have any questions,
here Miss Carrie is at your service:
Tel:+86-0755-89948019
Fax:86-755-89948030
Mob:86-18938861895
Website:wendy-rl.en.made-in-china.com